Moscow, Skolkovo

Search

Wet Milling Machine

Overview

Hydroshock Wet Milling Machine Generation 2 (WMM Gen.2) is a stand-alone milling machine for producing slurries (solid + liquid mixtures) from different materials: coal, carbon, peat other solids. 

WMM Gen.2 is a compact machine with low energy consumption, simple for operation and is characterized with stable output characteristics for wide range of raw materials. WMM is a unique development from Effective Energy Technologies GmbH. Originally WMM, Generation 1., was developed for producing Coal Water Slurry (CWS). Now its’ functionality is much wider.

Characteristics

  • Performance up to 4.6 m3/h, single pass
  • Solid/Liquid ratio
    • 55%/45% … 65%/35% – for coal
    • 50%/50% … 60%/40% – for carbon black (pCB)
    • 5%…18% solids for peat (turf)
  • Particle size after WMM
    • D90 below 200 mkm for coal/carbon, single pass
    • D90 below 120 mkm for coal/carbon, two-three passes
    • D90 below 200 mkm for peat, three passes
  • Installed capacity 40 kW – sum of capacity of all motors
  • Specific energy consumption – 7…15 kW*h/ton, depending on material and number of passes

Components

  • Silo for raw material
    • Standard – 200 liters
    • Optional – Up to 2.5 m3
    • Optional – vibrating beam
  • Screw feeder managed by frequency controller
  • Optional – Metal separator
  • Wet milling chamber
  • Output material pump
  • Control cabinet
  • Frame for mounting all equipment
Grainsize distribution after WMM2. Milling material - peat.